Type of plaster ceiling

The gypsum board is made of plaster and the main raw material, and is made of additives and fibers. It has the properties of light weight, heat insulation, sound absorption, non-combustibility and sawability. The gypsum board is combined with a light steel keel (pressed from galvanized steel) to form a light steel keel gypsum board. There are many types of light steel keel gypsum board ceilings, including gypsum board, decorative gypsum board, fiber gypsum board and hollow gypsum board. At present, the use of light steel keel gypsum board ceiling as the partition wall is used for modeling. There are fewer smallpox.

Ceiling ceiling material 2, square ceiling

It is mostly used in commercial space. It is generally used in 600mm and 600mm specifications. It has the distinction between bright bone and dark bone. The keel is usually made of aluminum or iron. The main board can be divided into three types: gypsum board, calcium silicate board and mineral wool board. Gypsum board has been described in the above paragraph, the following describes silicon calcium plate and mineral wool board.

1, calcium plate. The full name is fiber-reinforced calcium silicate board, which is made of siliceous materials (diatomaceous earth, bentonite, quartz powder, etc.), calcium materials, reinforcing fibers, etc. as the main raw materials, after pulping, slab, steaming, surface sand Lightweight sheet made by processes such as light. The calcium silicate board has the advantages of light weight, high strength, moisture resistance, corrosion resistance, fire prevention, etc. Another remarkable feature is that it is easy to reprocess, and it is not easy to be powdered and broken like the gypsum board.

2, cotton board. The slag is rotated by high temperature, high pressure and high speed to remove impurities and wash into mineral wool. The mineral wool board is mainly composed of ore, cement, pulp and perlite. Mineral wool boards have similar characteristics to calcium silicate boards, but sound absorption performance is better than gypsum board and calcium silicate board.

Ceiling ceiling material three, splint ceiling

Splint ceilings are commonly used in current renovations. The splint (also called plywood) is made by cutting and softening the logs, and cutting them into large sheets along the annual ring. The drying, finishing, gluing, blanking, hot pressing and sawing are made, which has light material and high strength. Good elasticity and toughness, impact and vibration resistance, easy processing and finishing, insulation and so on. For smallpox, the 5mm splint is generally used. The 3mm is too thin to be easily arched, and the 9mm is too thick. The reason why it is welcome is that it can easily create a variety of modeling ceilings, including curved, round, and square.

Splint ceilings may be lacquered for some time. The method is to first varnish (varnish) before finishing, and then do other processes after drying. Another disadvantage of the splint is that the interface will crack. The solution is to use the putty to fill the interface during the decoration.

Ceiling ceiling material four, microporous aluminum plate

Microporous aluminum plate, also known as dark bone square type gusset ceiling ceiling system, has the characteristics of flat surface, distinct ridge lines and fine seams. The ceiling system reflects the appearance of regular, generous, rich and elegant, and wide vision. The dark bone square type gusset ceiling system has the advantages of flame retardant, anti-corrosion and moisture proof, and it is convenient to assemble and disassemble. Each board can be disassembled and assembled independently, which is convenient for construction and maintenance.

Ceiling ceiling material five, painted aluminum buckle board ceiling

Integrated ceiling manufacturers invite investment, aluminum buckle plate profile is mainly divided into strip, square, grid three

1. Strip-shaped lacquered aluminum gusseted ceiling is a kind of long-shaped aluminum gusset plate, which is generally suitable for places such as aisles, and the design will help to weaken the feeling of narrowness. Most of the home decoration has no longer used this material, mainly because it is not resistant to dirt and is easily deformed.

2, square aluminum plate is divided into 300mm, 300mm, 600mm, 600mm two specifications. The former is suitable for places that are easily soiled, such as kitchens and toilets, and the latter is often used in commercial places such as offices. Square aluminum gusset is the current mainstream product. The square aluminum gusset plate is divided into two types: microporous and non-porous. The main advantage of the microporous aluminum gusset is that it can be ventilated, so that moisture in the high humidity areas such as the toilet can enter the top through the pores, avoiding the formation of water droplets on the surface of the board.

3. When the grid aluminum plate is used, be careful that some people use stainless steel to counterfeit. To verify whether it is pure aluminum or impure aluminum or stainless steel, you can use a magnet to verify that the real aluminum does not absorb magnetism. The secondary aluminum or pseudo aluminum can absorb magnetism. But this method is not a perfect solution, because illegal businesses can also fake this feature through degaussing.

Ceiling ceiling material six, stained glass ceiling

The decoration of the ceiling, in addition to the selection of materials, is mainly the problem of the size ratio of the shape. The former should be dealt with according to the specific circumstances, while the latter should be calculated on the basis of ergonomics and aesthetics. In terms of height, the interior clearance of home decoration should not be less than 2.5m. Otherwise, try not to make the ceiling, but use the plaster line frame to decorate.

Ceiling ceiling material seven, waterproof gypsum board

Waterproof gypsum board: generally used for space decoration with large environmental humidity, such as bathroom, shower room and kitchen. It also has high waterproof performance, the surface water absorption is ≤160g/m2, and the water absorption rate is about 5%. What kind of material is used for the bathroom ceiling? It is easy to answer: choose different materials according to different needs. The construction of waterproof gypsum board generally uses light steel keel skeleton. When constructing, pay attention to the anti-rust paint.

Ceiling ceiling material eight, advanced PVC board

High-grade PVC board: PVC ceiling type is generally used for the ceiling of the kitchen bathroom without fireproof requirements. The plastic gusset ceiling is composed of 40mm×40mm square planks, and the plastic gusset is installed under the skeleton. This kind of ceiling is more suitable for decoration. Bathroom ceiling. Specification format: 1300*2000, 1220*2440, 1000*2000 can also be customized according to user requirements.